Home > Product > Particulate Matter Sensor

LED Dust Sensor for Vacuum Cleaner

The LED dust sensor PM1009 adopts the infrared correlation principle, can accurately measure 4-channel particle count for different particle size for  10μm-60μm, 60μm-180μm, 180μm-500μm and >500μm which pass through vacuum cleaner's vacuum pipe or vacuum extension rod pipe, etc. (Note1)
Show More


  • Easy integration to customer device;
  • 4-channel particle count output for different particle size range: 10μm-60μm, 60μm-180μm, 180μm-500μm and 500μm;
  • Quick response;


CO2 Sensor CM1106-C
Operating principle LED infrared
Measurement range 0-10000pcs
Measurement channel 10μm-60μm, 60μm-180μm, 180μm-500μm, 500μm
Response time 0.5s
Working temperature -10~60℃; 0~95%RH (non-condensing)
Storage temperature -20~80℃; 0~95%RH (non-condensing)
Power supply DC 3.3V±5%, ripple <50mV
Working current Average <60mA
Signal output UART 3.3V level
Dimension Main control PCBA ( L26.5*W16.0*H1.0 mm)
Transmitter & receiver board(L20 *W10.56 mm)
Note 1:
- Vibration mitigation measures such as rubber gaskets should be taken to avoid vibration when installing the transmitting and receiving parts;
- The fixed installation should be 180° between the transmitting part and receiving part;
- The distance between transmitting part and receiving part should be less than or equal to 60mm;
- When dust contaminates the lens of receiving part,it can be wiped by medical cotton swab soaked in water and then with a dry swab to wipe it again.Do not use alcohol.
Show More

You can contact Cubic by telephone, mail or email , or you can submit an online Request for Quotation Form.


This website uses cookies to improve your user experience. By using this site, you consent to the use of cookies. You can find more information in our Privacy Policy.