Wall Mount HVAC Transmitter with Display AM6108BAM6108B

Wall mount HVAC transmitter AM6108B is a 5-in-1 built-in IAQ sensor with Modbus or BACnet. It can send control signal and deliver real-time indoor air quality data including particulate matter(PM1.0,PM2.5,PM10), carbon dioxide(CO2), VOC, temperature and humidity to building automation system, fan and valve can be adjusted accordingly, to keep indoor air quality at a comfortable level. Meanwhile, it also supports wireless data transmission via Wi-Fi, to realize online air quality monitoring.

Product Inquiry

Features

Modbus /BACnet protocol for choice
IoT wireless monitoring is available
HVAC system control function: Three levels of wind speed can be adjusted; Four working modes: intelligent, manual, mute, and time
Low power consumption
Standard configuration: CO2,PM,RH&TVOC (Optional)
Compatible with touch-screen operation, device ID and baud rate can be set via surface
OEM/ODM is available(sensor configuration, appearance design, PCBA design, software development etc.)

Specifications

	CO2 Sensor CM1106-C
Operating principle	CO2: non-dispersion infrared (NDIR); PM: Light scattering
Measurement range	CO2: 0~5000ppm; PM2.5: 0~999μg/m³ Temperature: -10°C~50°C; Relative Humidity: 0%~95%RH
CO2 accuracy	±(50ppm+5% of reading) /±(30ppm+3% of reading) is optional
PM accuracy	PM2.5: 0~100μg/m³, ±10μg/m³; >100μg/m³, ±10% of reading (25°C±2°C, 50±10%RH)
Temperature Accuracy	±1°C(0°C ~50°C)
Humidity Accuracy	±8%(0%~95%RH)
UI Screen	Touch Screen
Output	Modbus-RTU or BACnet-MSTP or Wi-Fi
Power supply	12VDC~24VDC
Working Condition	-10°C~50°C,0~95%RH(non-condensing)
Storage condition	-20℃~60℃,0~95%RH(non-condensing)
Dimension	W86H86D25(mm)